耐候性試驗
Weathering Testing咨詢熱線
18566398802ISO 6270 is intended to give consistent conditions and procedures for the conditioning of pre-prepared test specimens which are to be evaluated for defects which may develop when they are subjected to humid ambient atmospheres such as constant condensation-water atmospheres or alternating condensation-water atmospheres.
The tests are designed to clarify the behaviour of the test specimens in humid ambient atmospheres, and to pinpoint any defects in the protection of the test specimens against corrosion. The testing of coatings in these atmospheres does not necessarily give lifetime prediction data.
After conditioning, the test specimens are evaluated either in accordance with agreed International Standards, such as the appropriate part(s) of ISO 4628, Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance, or by procedures agreed between the interested parties.
This part of ISO 6270 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reproducible.
NOTE The shape and preparation of the test specimens, the duration of the test and the assessment of the test results are not covered in this part of ISO 6270.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3270, Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
Q-fog鹽霧試驗箱用于ISO 6270-2:2005的測試方法
以下標準信息來自互聯網搜索整理,僅供學習使用,可以免費下載。
歡迎了解專業工程師提供的ISO 6270-2:2005標準解讀,請加微信。
溫馨提醒:本ISO 6270-2:2005可能存在更新的版本,建議尋找ISO 6270-2:2005的發行商確認。
Q-FOG CCT1100鹽霧腐蝕試驗機具有1103升大容量測試能力,可在一臺機器中實現高濕度、干燥、靜止、加熱等多個不同的循環測試條件。
Q-FOG CCT1100 馬上詢價Q-FOG CRH1100是一款的具有相對濕度控制功能和溶液噴淋功能的鹽霧試驗箱.
Q-FOG CRH1100 馬上詢價Q-FOG CRH600比起SSP/CCT鹽霧試驗箱增加了一個可調濕度控制功能,這意味著CRH鹽霧試驗箱具備更廣泛的標準適用范圍。
Q-FOG CRH600 馬上詢價Q-LAB CCT600鹽霧腐蝕試驗箱不僅具備了SSP 鹽霧試驗箱的所有優點,同時還增加100%濕度功能。CCT600測試樣品容量為640升
Q-FOG CCT600 馬上詢價