ASTM D1611 皮革與金屬接觸產生腐蝕的試驗方法

ASTM D1611-2012發行信息

標準號ASTM D1611-2012

中文名皮革與金屬接觸產生腐蝕的試驗方法

英文名 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

發布日期2012

實施日期

廢止日期無

中國標準分類號Y45

國際標準分類號59.140.30 (Leather and furs)

發布單位US-ASTM

ASTM D1611-2012適用范圍

The procedure is primarily intended to evaluate chrome leather intended for use in hydraulic systems under circumstances where metal corrosion is a serious factor. A high relative humidity is used for the purpose of accelerating the results.

1.1 This test method covers the qualitative and quantitative determination of corrosion produced by leather in contact with metal. This test method does not apply to wet blue.

1.2 The values stated in inch-pound units are to be regarded as the standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

本程序主要用于在金屬腐蝕是一個嚴重因素的情況下評估液壓系統中使用的鉻革。高相對濕度用于加速結果。

1.1本試驗方法包括皮革與金屬接觸產生的腐蝕的定性和定量測定。本試驗方法不適用于濕藍色。

1.2以英寸-磅單位表示的值應視為標準值。

1.3本標準并非旨在解決與其使用相關的所有安全問題（如有）。本標準的使用者有責任在使用前建立適當?shù)陌踩徒】祵?shí)踐，并確定監管限制的適用性。